Looking around for mold growth in your home is a burden that no one wants to have to take on, but sometimes not looking for it can cost you thousands of dollars in renovations later on after the growth has gotten so bad that the affected areas have to be completely gutted. Knowing how to spot mold early on is the key to saving all of this time and money, but it is not always as visible as some pictures on the internet and the news may have you believe. While mold does come in a variety of colorful species, it is not always as colorful as most of the images you come across.
Some molds are nigh invisible and grow on a few different surfaces mostly undetected unless you know how you need to look for them. Wood paneling, for example, can have mold growing on it and you not even realize it without the use of a simple bright flashlight. To be able to see the mold, however, you will need to know how to use the flashlight correctly. Instead of shining the light directly toward the paneling, you need to shine it along the surface of the paneling at an angle, so as to give the possible mold growth some depth. Only in this way will you be able to detect the extremely light colored molds growing on the different surfaces of your home. These molds tend to be a species in the Aspergillus or Penicillium genus.
Wood paneling is common in older homes and in homes that have been flood damaged, since replacing the affected drywall is a lot more expensive than simply installing paneling in its place. This is one reason mold likes to grow on this paneling: it is typically old and should be replaced.
You can miss these molds easily when you do a casual inspection of your home, but just taking a flashlight with you and knowing how to use it can save you a lot of money in the end. Molds that are not visible to you readily are not necessarily harmless; they can be just as detrimental to the building structure and your health as the molds that you do have the ability to see with the naked eye. Mold is not always an invisible threat, but it certainly can be, even if you think you know how to look for it.
Jim Corkern is a writer and respected contributor to the Water damage restoration and mold remediation Industry. Visit his sites for more information.
http://www.waterbasementct.info and
http://www.moldrestorationusa.com
Friday, September 28, 2007
Most homeowners do not consider the basement a very important part of the house, but since the rest of your home’s structure is on top of this, you might want to rethink just how valuable of a room this is. Whether you use it for storage, a guest bedroom, laundry room, or anything else you can think of, it is important to make sure that this room of the house remains structurally sound.
While it is a common problem, wet basements are something that most homeowners do not have to deal with if they take some precautions and the time to make some adjustments on their own. Many wet basement issues can be fixed by the homeowner without having to hire any outside help.
You can fix any cracks in the concrete walls of your basement where water is leaking in by using a simple injection of concrete. Doing this used to require expensive and heavy equipment, but the size and expense of this has gone down so significantly that you can now do it with a normal caulking gun. Do not try do this with the silicone caulking that you would use in a bathroom or kitchen or attempt to fix it with cement, either. These two items will only become loose and fall out, no longer forming the water barrier that you need to have in place.
If water is forming in puddles around the foundation of your house, then you probably need to pile some more soil around the house so the water runs away from the house instead of leaking down into the basement. Installing a drainage system can also help with this. Making sure your rain gutters stay cleaned out is also another thing that you can do to try and keep water out of your basement. While they seem unrelated, gutters that are clogged let water merely fall off the roof and down to the base of the house.
You can also choose to install a dehumidifier and some energy efficient windows. You will know that you have a humidity problem in the room if condensation builds up on the window panes. Putting in an exhaust vent down there can also help reduce the humidity, especially if you use the area as a laundry room or an extra bathroom. This helps prevent the steam from being absorbed by the rafters or the drywall ceiling.
Jim Corkern is a writer and promoter of quality
Miami Residential Water Damage Restoration Contractors and
Orlando water Damage companies.
While it is a common problem, wet basements are something that most homeowners do not have to deal with if they take some precautions and the time to make some adjustments on their own. Many wet basement issues can be fixed by the homeowner without having to hire any outside help.
You can fix any cracks in the concrete walls of your basement where water is leaking in by using a simple injection of concrete. Doing this used to require expensive and heavy equipment, but the size and expense of this has gone down so significantly that you can now do it with a normal caulking gun. Do not try do this with the silicone caulking that you would use in a bathroom or kitchen or attempt to fix it with cement, either. These two items will only become loose and fall out, no longer forming the water barrier that you need to have in place.
If water is forming in puddles around the foundation of your house, then you probably need to pile some more soil around the house so the water runs away from the house instead of leaking down into the basement. Installing a drainage system can also help with this. Making sure your rain gutters stay cleaned out is also another thing that you can do to try and keep water out of your basement. While they seem unrelated, gutters that are clogged let water merely fall off the roof and down to the base of the house.
You can also choose to install a dehumidifier and some energy efficient windows. You will know that you have a humidity problem in the room if condensation builds up on the window panes. Putting in an exhaust vent down there can also help reduce the humidity, especially if you use the area as a laundry room or an extra bathroom. This helps prevent the steam from being absorbed by the rafters or the drywall ceiling.
Jim Corkern is a writer and promoter of quality
Miami Residential Water Damage Restoration Contractors and
Orlando water Damage companies.
How to Deal With Sewage Damage
There are only a few things that bring a more unpleasant image to the mind of a person than the idea of sewage and coming into contact with it. If the area where you live has been flooded recently, you may need to deal with that very thing as you are allowed to go back to your home after the waters have receded, since it is often the case that these very waters are contaminated with it, among other unpleasant items. Sewage, chemicals, decaying bodies, and other things may be lurking in the flood water that has overrun your home, so cleaning it out of the nooks and crannies of your home is going to be quite the task. If you are prepared, however, you can save a lot of money by doing most of the cleanup yourself.
Everything in the house needs to be taken outside, especially wet furniture. Unfortunately, your upholstered furniture will not be salvageable unless there is little padding, such as the upholstery on some dining chairs. Large items like couches and recliners will need to be thrown away 95% of the time because the padding will soak up sewage, soil, and chemicals, causing it to become a biological hazard. These items are very difficult to completely disinfect and you will waste much time and money trying to do so. Replacing them is your best bet.
Cloth items in the tops of closets that did not come into contact with the water can become molded simply because of the humidity in the house. This typically starts after about 3 or 4 days, since they were not actually soaked by the flood. Get these items out and wash them as soon as you can, but not in your home’s washer, since it was probably flooded, too. Do not use your household appliances until they have been checked for electrical damage. Take anything you need to wash to a Laundromat.
Mold can start growing on textiles and other materials within about 48 hours after they have gotten wet. You can save these items most of the time, but they may be stained. Cleaning molded items made of real leather, however, is not possible.
Scrubbing your floors can be done by taking a couple of buckets, one with cleaning water and the other with rinsing water, and being sure not to contaminate the clean water with sewage. Do not put the sponge or mop back into the clean water without rinsing it first. Replace the rinsing water as often as you need to.
Jim Corkern is a writer and promoter of quality
mold removal in Atlanta Georgia and
Water Damage Restoration companies.
Everything in the house needs to be taken outside, especially wet furniture. Unfortunately, your upholstered furniture will not be salvageable unless there is little padding, such as the upholstery on some dining chairs. Large items like couches and recliners will need to be thrown away 95% of the time because the padding will soak up sewage, soil, and chemicals, causing it to become a biological hazard. These items are very difficult to completely disinfect and you will waste much time and money trying to do so. Replacing them is your best bet.
Cloth items in the tops of closets that did not come into contact with the water can become molded simply because of the humidity in the house. This typically starts after about 3 or 4 days, since they were not actually soaked by the flood. Get these items out and wash them as soon as you can, but not in your home’s washer, since it was probably flooded, too. Do not use your household appliances until they have been checked for electrical damage. Take anything you need to wash to a Laundromat.
Mold can start growing on textiles and other materials within about 48 hours after they have gotten wet. You can save these items most of the time, but they may be stained. Cleaning molded items made of real leather, however, is not possible.
Scrubbing your floors can be done by taking a couple of buckets, one with cleaning water and the other with rinsing water, and being sure not to contaminate the clean water with sewage. Do not put the sponge or mop back into the clean water without rinsing it first. Replace the rinsing water as often as you need to.
Jim Corkern is a writer and promoter of quality
mold removal in Atlanta Georgia and
Water Damage Restoration companies.
Dealing With Wet Front and Backyards
Standing water in the front or the back yard can be an eyesore for both the homeowner and other people in the neighborhood, but it is not typically something that cannot be remedied. Depending on the source of the problem, it can be solved usually by either installing a drainage system or by the addition of a bit of soil in the right areas.
Allowing standing water in your yard, especially around the foundation of your house, can be detrimental both to the value of the property and to the structural integrity of the home. Water collecting in pockets around the base of the house can seep down into the basement or cause the house to slowly sink into the ground due to soil displacement over time. Wet soil does not form a good foundation for a home, so you need to try and fix this problem as soon as you run across it.
Many times simply piling soil in the areas where the water collects will fix the problem, since it is usually a simple issue of elevation. Some areas of your yard may not be the same elevation as other parts and water collects in these spots. Putting soil in these and planting grass over them not only for a pleasing visual effect, but also to keep the soil well in place, is the only real way to deal with elevation issues.
Putting in a drainage system is also a good option and it is not that expensive to install. You need a shovel, some gravel, PVC pipe, and a sink strainer. You should not have to hire anyone to do this for you, since all it takes is a little common sense and a bit of effort. You do, however, need to make sure that you obtain a permit to install the drain system, depending on where you live. Some areas may require that you get a permit to install a drainage system in your yard and want you to ask permission before directing the water into a city sewer or ditch.
Dig the ditch starting at the part of the yard that you want to drain and dig it to the area you want the water to go to. This ditch should slant downhill so that the water does not simply stand inside the drain and go nowhere. To get an adequate amount of water flow, it should decline 6 inches for every 100 feet. Install the PVC pipe inside it and cover with gravel. Cover that with soil and plant grass over it. This should keep the water drained well, but if you need more than one spot in your yard drained, the construction may be a little more complicated.
Jim Corkern is a writer and promoter of quality
Water Damage Miami and
water damage restoration in atlanta companies.
Allowing standing water in your yard, especially around the foundation of your house, can be detrimental both to the value of the property and to the structural integrity of the home. Water collecting in pockets around the base of the house can seep down into the basement or cause the house to slowly sink into the ground due to soil displacement over time. Wet soil does not form a good foundation for a home, so you need to try and fix this problem as soon as you run across it.
Many times simply piling soil in the areas where the water collects will fix the problem, since it is usually a simple issue of elevation. Some areas of your yard may not be the same elevation as other parts and water collects in these spots. Putting soil in these and planting grass over them not only for a pleasing visual effect, but also to keep the soil well in place, is the only real way to deal with elevation issues.
Putting in a drainage system is also a good option and it is not that expensive to install. You need a shovel, some gravel, PVC pipe, and a sink strainer. You should not have to hire anyone to do this for you, since all it takes is a little common sense and a bit of effort. You do, however, need to make sure that you obtain a permit to install the drain system, depending on where you live. Some areas may require that you get a permit to install a drainage system in your yard and want you to ask permission before directing the water into a city sewer or ditch.
Dig the ditch starting at the part of the yard that you want to drain and dig it to the area you want the water to go to. This ditch should slant downhill so that the water does not simply stand inside the drain and go nowhere. To get an adequate amount of water flow, it should decline 6 inches for every 100 feet. Install the PVC pipe inside it and cover with gravel. Cover that with soil and plant grass over it. This should keep the water drained well, but if you need more than one spot in your yard drained, the construction may be a little more complicated.
Jim Corkern is a writer and promoter of quality
Water Damage Miami and
water damage restoration in atlanta companies.
Friday, September 14, 2007
Water Damaged Clothing Cleaning Methods
One of the most devastating things that can happen to a home owner is a house fire. And more often than not, you would have to either replace or attempt to restore fire or smoke damaged items. If you choose to simply clean the items, you must make sure that you clean them thoroughly before you make use of them again. While it may be quite a chore to try and restore most fire damaged items in the house, clothing is an almost entirely different story. Cleaning smoke damaged clothing is a very simple thing to do, and is most dependent on when you decide to wash them, and with what cleaning agent you employ to wash them.
While it is very easy to clean to clean the clothing, the task in of itself can be very daunting and, quite frankly, boring. However, one thing that can make the task easier to accomplish in a timely manner is to simply sort out your clothes by fabric types. This will help to determine how to care for each individual fabric type. This helps to ensure that you do not cause more damage than there already was. There are some things that are important to have dry cleaned as opposed to the others that will simply need to placed in a washer in your laundry room.
It is best if you sort out the clothing in accordance to how much soot or ash the clothes have managed to absorb. You should group the lightly soiled items together with other lightly soiled items. And, obviously, you should clean them together as well. However, you should break the lightly soiled items down into other groups based on fabric types, because some fabrics may not need to be as strongly cleaned because it could cause more damage.
However, you should shake out heavily soot soiled clothing before you attempt to wash them. This will help to remove as much of the soot as possible. It is also very important that you break the more heavily soiled clothes up into groups, as you did with the lighter soiled clothes. You should also make sure and wash the items twice at the very least. This is to help make sure that the clothes are completely clean.
It is a good idea to use the full recommended amount of laundry detergent for each wash load. Depending on the clothing’s material, you will have to adjust the water’s temperature
Jim Corkern is a writer and promoter of quality
Connecticut Mold Remediation services and
flood and water damage cleanup companies across the united states.
While it is very easy to clean to clean the clothing, the task in of itself can be very daunting and, quite frankly, boring. However, one thing that can make the task easier to accomplish in a timely manner is to simply sort out your clothes by fabric types. This will help to determine how to care for each individual fabric type. This helps to ensure that you do not cause more damage than there already was. There are some things that are important to have dry cleaned as opposed to the others that will simply need to placed in a washer in your laundry room.
It is best if you sort out the clothing in accordance to how much soot or ash the clothes have managed to absorb. You should group the lightly soiled items together with other lightly soiled items. And, obviously, you should clean them together as well. However, you should break the lightly soiled items down into other groups based on fabric types, because some fabrics may not need to be as strongly cleaned because it could cause more damage.
However, you should shake out heavily soot soiled clothing before you attempt to wash them. This will help to remove as much of the soot as possible. It is also very important that you break the more heavily soiled clothes up into groups, as you did with the lighter soiled clothes. You should also make sure and wash the items twice at the very least. This is to help make sure that the clothes are completely clean.
It is a good idea to use the full recommended amount of laundry detergent for each wash load. Depending on the clothing’s material, you will have to adjust the water’s temperature
Jim Corkern is a writer and promoter of quality
Connecticut Mold Remediation services and
flood and water damage cleanup companies across the united states.
Venting Is a Good Thing
If you do not have a ceiling exhaust fan installed in your bathrooms, it will not be long before you realize why you need one. There are so many reasons that they are a necessary item. Have you ever tried to blow dry your hair in a steamy bathroom? If you could see yourself in the mirror it might help, but with all that moisture in the air it’s not likely. Then there are also those unspeakable bathroom odors that almost anyone would rather not speak of, but they go along with the natural procession of things and the exhaust fan is a marvelous invention, if only to dispel an unpleasantness that remains even after its last occupant is gone!
A bad hair-do will be the least of your worries if the moisture problem is not corrected.
A consistently steamy bathroom can result in shrinking the edges of wallpaper and peeling paint. These minor complications are bad enough in themselves, but with prolonged exposure, it can actually cause wooden window frames to swell, preventing them from opening easily, or not at all. Other wood, such as door frames, crown molding, and baseboards can swell and be damaged also, and then there is the scary mold that can grow on the ceiling and walls. It can be much cheaper in the long run to install exhaust fans rather than wait around for more costly repairs to show up later. Rest assured, any unresolved water problems in a home will not result in any thing good.
The exhaust fan is something that is rarely overlooked in newer homes, but not so in older ones. If you are a do it yourselfer, this could be a project you can handle. However, it does involve some electrical wiring, cutting holes through your ceiling and possibly through your outer wall in the attic. Home improvement stores have them with or without lights. If there is any existing light fixture in the ceiling of your bathroom, it is an advantage. If not, it will be a little more involved. In any case, if you are not familiar with electrical wiring and reciprocating saws, then hiring someone to install it for you might be the easiest and safest option. Saving money doing it yourself is great if your work is done properly. Just remember it is only home improvement if you are fixing old problems and not creating new ones!
Jim Corkern is a writer and promoter of quality
damage restoration companies and
mold removal companies across the united states.
A bad hair-do will be the least of your worries if the moisture problem is not corrected.
A consistently steamy bathroom can result in shrinking the edges of wallpaper and peeling paint. These minor complications are bad enough in themselves, but with prolonged exposure, it can actually cause wooden window frames to swell, preventing them from opening easily, or not at all. Other wood, such as door frames, crown molding, and baseboards can swell and be damaged also, and then there is the scary mold that can grow on the ceiling and walls. It can be much cheaper in the long run to install exhaust fans rather than wait around for more costly repairs to show up later. Rest assured, any unresolved water problems in a home will not result in any thing good.
The exhaust fan is something that is rarely overlooked in newer homes, but not so in older ones. If you are a do it yourselfer, this could be a project you can handle. However, it does involve some electrical wiring, cutting holes through your ceiling and possibly through your outer wall in the attic. Home improvement stores have them with or without lights. If there is any existing light fixture in the ceiling of your bathroom, it is an advantage. If not, it will be a little more involved. In any case, if you are not familiar with electrical wiring and reciprocating saws, then hiring someone to install it for you might be the easiest and safest option. Saving money doing it yourself is great if your work is done properly. Just remember it is only home improvement if you are fixing old problems and not creating new ones!
Jim Corkern is a writer and promoter of quality
damage restoration companies and
mold removal companies across the united states.
Replacing Molded Carpet
For a homeowner there is nothing more unsightly then mold. Even worse, still, is mold growing on your carpet. The first thing one usually decides to do upon discovering mold is to have it thoroughly cleaned. However, this can be far more difficult than it actually sounds. One of the biggest problems you can face may be that the mold isn’t simply on your carpet. It may also be on the padding beneath the carpet, and this could just cause even more damage than the original carpet. And if this is the case, the whole carpet should be removed. The padding should also be removed and thrown away.
Fortunately, removing carpet is a relatively simple task that can be achieved by someone who has never worked with carpet in their life. All the process takes is a little bit of common sense, and perhaps some patience.
The first thing you should do when removing the carpet is to take up the moldings that go all around the floor and to begin to take the doors from off of the hinges. The only real purpose behind taking the doors off of the hinges is to create more space for you to work with as you take the old carpet out of the floor and put the new carpet in its place. It is probably a good idea to employ the use of a utility knife to cut the carpet up into strips. Cutting the carpet will make the task of taking the carpet out much easier. However, when using the knife, it is very important to be careful, as you might have a hardwood floor underneath and it would be a tragedy to cut it.
You should always start at one end of the room and to pull the carpet from off of the tackless strips and to roll it up neatly. You can install new tackless strips later on if you make the decision to put a new carpet in later. You should install them around the perimeter of the room you’re working in, but make sure that you do not put them in front of any doorways. There needs to also be at least one half inch of space between the stips and the wall. The tack points should be facing the wall.
You should check the floor underneath for mold damage. It may be refinished if damage is found.
You won’t have to reinstall carpet where the old carpet had been, but only depending on the condition of the floor.
Jim Corkern is a writer and promoter of quality
water damage restoration companies and
Dallas Residential Water Damage Restoration Contractors.
Fortunately, removing carpet is a relatively simple task that can be achieved by someone who has never worked with carpet in their life. All the process takes is a little bit of common sense, and perhaps some patience.
The first thing you should do when removing the carpet is to take up the moldings that go all around the floor and to begin to take the doors from off of the hinges. The only real purpose behind taking the doors off of the hinges is to create more space for you to work with as you take the old carpet out of the floor and put the new carpet in its place. It is probably a good idea to employ the use of a utility knife to cut the carpet up into strips. Cutting the carpet will make the task of taking the carpet out much easier. However, when using the knife, it is very important to be careful, as you might have a hardwood floor underneath and it would be a tragedy to cut it.
You should always start at one end of the room and to pull the carpet from off of the tackless strips and to roll it up neatly. You can install new tackless strips later on if you make the decision to put a new carpet in later. You should install them around the perimeter of the room you’re working in, but make sure that you do not put them in front of any doorways. There needs to also be at least one half inch of space between the stips and the wall. The tack points should be facing the wall.
You should check the floor underneath for mold damage. It may be refinished if damage is found.
You won’t have to reinstall carpet where the old carpet had been, but only depending on the condition of the floor.
Jim Corkern is a writer and promoter of quality
water damage restoration companies and
Dallas Residential Water Damage Restoration Contractors.
Protecting Your Stuff from Mold
It is well known that there is no such thing as a “mold free” environment. It is in the air we breathe, on our furniture, on our clothes, and definitely in our homes. It is simply a matter of whether or not the mold actually starts to grow on our property that determines if there is a problem. Mold likes to grow in wet environments, so wet kitchen floors are potential breeding grounds, as well as un-dried dishes in your kitchen.
Even items that you might use to take care of an infant with are susceptible to mold contamination. Things like baby clothes and even food are targets for contamination. Baby bottles are no longer just round cylinders, as they used to be. To accommodate twenty first century styles, plastic companies that produce these products have changed to using several different odd shapes and designs which make the bottles more difficult to clean in some cases. If these bottles are not completely dry and are placed back into a refrigerator, they can become a veritable breeding ground for mold and other bacteria. However, there is a way to prevent this. After drying the bottle as best you can, simply place the bottle into the freezer and let it sit in there until you are ready to use it again. These cold temperatures are, for lack of a better word, unfit for mold to grow in. This is the same reason why it is popular to put common items like flour, cornmeal, and sugar in the freezer.
Clothes that have not been attended to in a long amount of time that gather in the back of the closet are hotbeds for molds. It is important that you do not pack clothes close together, as it can cut off air circulation in the closet and that will create warmth which is essential in order for mold to survive. If there is warmth, and if there is enough humidity in your home, this can cause further mold infestation. A good way to prevent mold in this area is to install a vent inside of the closet.
Damp and dirty clothing left in a bathroom closet or hamper is another breeding ground for mold. The same goes for damp carpets, as well. While having a carpet in the bathroom is not a good idea when mold is involved, it can be worsened with wet clothing. It’s important that you take the laundry out of the closet or hamper constantly.
Jim Corkern is a writer and respected contributor to the Water damage restoration and mold remediation Industry. Visit his sites for more information.
http://www.waterbasementct.info and
http://www.moldrestorationusa.com
Even items that you might use to take care of an infant with are susceptible to mold contamination. Things like baby clothes and even food are targets for contamination. Baby bottles are no longer just round cylinders, as they used to be. To accommodate twenty first century styles, plastic companies that produce these products have changed to using several different odd shapes and designs which make the bottles more difficult to clean in some cases. If these bottles are not completely dry and are placed back into a refrigerator, they can become a veritable breeding ground for mold and other bacteria. However, there is a way to prevent this. After drying the bottle as best you can, simply place the bottle into the freezer and let it sit in there until you are ready to use it again. These cold temperatures are, for lack of a better word, unfit for mold to grow in. This is the same reason why it is popular to put common items like flour, cornmeal, and sugar in the freezer.
Clothes that have not been attended to in a long amount of time that gather in the back of the closet are hotbeds for molds. It is important that you do not pack clothes close together, as it can cut off air circulation in the closet and that will create warmth which is essential in order for mold to survive. If there is warmth, and if there is enough humidity in your home, this can cause further mold infestation. A good way to prevent mold in this area is to install a vent inside of the closet.
Damp and dirty clothing left in a bathroom closet or hamper is another breeding ground for mold. The same goes for damp carpets, as well. While having a carpet in the bathroom is not a good idea when mold is involved, it can be worsened with wet clothing. It’s important that you take the laundry out of the closet or hamper constantly.
Jim Corkern is a writer and respected contributor to the Water damage restoration and mold remediation Industry. Visit his sites for more information.
http://www.waterbasementct.info and
http://www.moldrestorationusa.com
Moldy Fabric Cleaning Methods
There is hardly a person in the world that hasn’t gone through their wardrobe and discovered that one favorite shirt of theirs from their younger days. And then the moment is ruined upon the discovery of a fuzzy substance on the shirt. If you found this shirt in the back of your closet, then you should go wash your hands, because the shirt has been infected with mold and touching mold spores with your bare hands can be very hazardous for your health. There are several medical problems that could arise from contact with mold. Some of these problems are skin rashes, allergic reactions, runny noses, and the like.
If you do have articles of clothing which contain mold, don’t worry because most molded clothing can be cleaned as good as new. However, the mold can end up leaving stains. Bleach can be a very effective form of mold removal. However, this usually works best when cleaning white clothing. Other effective cleaning methods include using a scrub brush, which can remove a good deal of the mold and then place a pre-wash spray on it. Allow this spray to soak for roughly forty five minutes and then put it into the washing machine. It is very important that you allow these clothes to dry naturally in the sun. If you were to use some artificial source of heat, then the stain could set in even deeper in the fabric, and the sun can help further the bleaching process white clothing.
While regular clothing is easy to have mold removed from, you may have no such luck with genuine leather or cowhide. These types of items are easily susceptible to being discolored beyond repair. Most of these items are incapable of being restored, and they are probably better left in the garbage.
However, upholstery and curtains that have come in contact with mold can be cleaned using the same aforementioned methods as described above. It is important that you also purchase a vacuum cleaner that has a HEPA filter in it in order to accommodate a mold free home. If you use this vacuum and its brush attachments to gather up all of the mold and its consequential spores, the filter will prevent these spores from being re-released. This will prevent from having to repeat this process or, perhaps even worse, have to throw out more clothing.
Jim Corkern is a writer and promoter of quality
mold removal in Atlanta Georgia and
Water Damage Restoration companies.
If you do have articles of clothing which contain mold, don’t worry because most molded clothing can be cleaned as good as new. However, the mold can end up leaving stains. Bleach can be a very effective form of mold removal. However, this usually works best when cleaning white clothing. Other effective cleaning methods include using a scrub brush, which can remove a good deal of the mold and then place a pre-wash spray on it. Allow this spray to soak for roughly forty five minutes and then put it into the washing machine. It is very important that you allow these clothes to dry naturally in the sun. If you were to use some artificial source of heat, then the stain could set in even deeper in the fabric, and the sun can help further the bleaching process white clothing.
While regular clothing is easy to have mold removed from, you may have no such luck with genuine leather or cowhide. These types of items are easily susceptible to being discolored beyond repair. Most of these items are incapable of being restored, and they are probably better left in the garbage.
However, upholstery and curtains that have come in contact with mold can be cleaned using the same aforementioned methods as described above. It is important that you also purchase a vacuum cleaner that has a HEPA filter in it in order to accommodate a mold free home. If you use this vacuum and its brush attachments to gather up all of the mold and its consequential spores, the filter will prevent these spores from being re-released. This will prevent from having to repeat this process or, perhaps even worse, have to throw out more clothing.
Jim Corkern is a writer and promoter of quality
mold removal in Atlanta Georgia and
Water Damage Restoration companies.
Subscribe to:
Posts (Atom)
